|
|
Motors & Drivers - AX Driver |
|
AX Driver is an AC nut runner for fastening of bolts, screws and nuts with
field-oriented programmable. A fastening method suitable to the purpose can be
selected from among five different methods. Such as torque method, angle method,
etc., Supports quality control with liquid crystal display of the torque waveform.
|
- The fastening results and cycle torque wave form is displayed.
- Five different fastening methods as standard finctions can be selected
- Two axes can be controlled by one controller (two axis specification)
|
|
|
 |
AX Driver shown.
|
 |
|
 |
 |
| Model Number |
AX200 |
AX500 |
| Range |
3.5-18 N.M. |
8-45 N.M. |
| Fastening Accuracy |
± - 2% Full Scale |
| Drive Motor |
AC SERVO Motor |
| Motor Power Consumption |
400 W |
400 W |
| Torque Sensor |
Planetary gear with torque reaction sensor(strain gage) |
| Speed Reducing Ratio |
6.0 |
14 |
| Driving Control |
Channel control or Program control |
| Number of Programs |
Channel control 16
Program control 16 |
| Display |
LCD |
| Fault Display |
Upper and Lower Limits
LCD Light for Accept/Reject Including Electrical Outputs |
| Display Offset Correction |
50-150% |
| Self Diagnosis Function |
Error Message Displayed on LCD |
| Total Wieght |
3.5kg |
4.0kg |
| Torque Output |
Printer |
Parallel Centronics |
| Interface |
Serial RS232C |
| Controller Weight |
6.8kg |
| Input Power Source |
AC 220 V Single-Phase 50/60Hz |
| Controller Power Consumption |
1300 VA |
|
|
|
Orbital Fastening